Low friction (Roller end / flange contact area)
The open flange design., together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capacity.
Long service life
The logarithmic roller profile reduces edge stresses at the roller/raceway contact . and sensitivity to misalignment and shaft deflection.
Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Separable and interchangeable
The separable components of SKF cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections.
High speed capability
The cage designs are suitable for high speeds, rapid accelerations and peak loads.

Bearing Number	Bore Dia	Outer DIa	Width	Size
75 mm x 160 mm x 37 mm E SNR N.315.E.G15 Single row cylindrical roller bearings	Japan	SNR	CO CQ	N.315.E.G15
50 mm x 110 mm x 27 mm da min NTN N310G1P5 Single row cylindrical roller bearings	Japan	NTN	CO CQ	N310G1P5
140 mm x 300 mm x 62 mm Product Group - BDI NTN NU328EG1C3 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NU328EG1C3
55 mm x 120 mm x 29 mm Nlim (grease) NTN NU311ET2C4 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NU311ET2C4
70 mm x 125 mm x 24 mm Characteristic rolling element frequency, BSF NTN NUP214EG1U Single row cylindrical roller bearings	Japan	NTN	CO CQ	NUP214EG1U
45 mm x 85 mm x 19 mm Product Group - BDI NTN NJ209G1C3 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NJ209G1C3
20 mm x 47 mm x 18 mm Weight / Kilogram NTN NU2204ET2X Single row cylindrical roller bearings	Japan	NTN	CO CQ	NU2204ET2X
40 mm x 90 mm x 23 mm Relubricatable NTN NJ308C3 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NJ308C3
50 mm x 90 mm x 20 mm Da max NTN NF210EG1 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NF210EG1
110 mm x 240 mm x 50 mm Dynamic load, C NTN NU322C4 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NU322C4
35 mm x 72 mm x 17 mm F NTN NUP207ET2XC4 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NUP207ET2XC4
40 mm x 110 mm x 27 mm Dynamic load, C NTN NUP408G1C4 Single row cylindrical roller bearings	Japan	NTN	CO CQ	NUP408G1C4